Activating Work Order
When in the MES Manager page at https://mes.pickeringtest.com, in the top left corner press the spy glass button to open the search page
This is an early version of this guide intended to assist during testing. Further versions of this guide will describe features in more detail
From here you can search for a Work Order by pasting a number from x3/Strip3. You can then click to open the Work Order, which will bring you to a new page
Click the Generate button in order to print off the necessary labels. There is also information on the left side about the Word Order.
You can then select how many batches you wish to print off, as well as adjust the quantity per batch. Once you have done this, press the generate button
Currently you can only print in 1 quantity at a time, so if you have an order of 110 you want to split into 2 batches, you would need to print the 100 first, then do the 10 separately
Next select the batch or batches you want to print, then press the Print QR Codes button
You can then select which printer you wish to use. For testing please use Zebra-Strip3 only. Once you have selected a printer, press Print
If you need to reprint any labels, press the 3 little dots in the right of the screen, then select Reprint QR Codes