6.1.1.2 Generating Separate Files

  1. In the PDF section of the output containers click on Change, the window will be as per the PDF Settings – Default image.
  2. Single left click on –None—which will display the PDF Settings – No Container image, select [Container Name] (PDF) as per image PDF Settings – Container Selected then press Done.
  3. Single left click on Job1.PDF which will display the PDF Settings – Filename image, select Separate File For Each Output Using Output Name (see image PDF Settings – Separate File) then press Done.
  4. The window should now look as per image PDF Settings – Configured.
  5. Schematics with a portrait orientation are not correctly represented in the PDF output, to correct this press Advanced from the PDF Settings window (see PDF Settings – Page View image) then change Source Document to Page Setup Dialog for the PCB Page Size And Orientation Source.
  6. This completes the configuration, press OK.

Figure 23 PDF Settings - Default

Figure 24 PDF Settings  No Container

Figure 25 PDF Settings  Container Selected

Figure 26 PDF Settings  Filename

Figure 27 PDF Settings  Separate File

Figure 28 PDF Settings - Configured

Figure 29 PDF Settings  Page View

7. Select Generate Content from the output container section, the files will be generated & then open in Adobe Reader (this will take some time).